6mm Carbide Burr Manufacturing Expert

  • Professional Supplier of 6mm carbide burr over 11 years.
  • 41 sets of great CNC machines ensure fast delivery
  • Technology coming from the USA delivers the sharpest flutes
  • Quality guarantee policy promises your business risk-free
Request Our Best Quote
6mm Carbide Burr video cover

Syndent 6mm Carbide Burr

Syndent produces the 6mm carbide burr with the advanced CNC machine. And we have more quality checking engineers than others. We control the 6mm carbide burr within the best tolerance.

Syndent 6mm carbide burr, also called 6mm die grinder bit, is a solid carbide burr. The carbide cutter was silver-brazed onto the 6mm steel shank automatically. For inch size countries, you need to purchase Syndent 1/4 carbide burr.

Our 6mm carbide burrs are particularly well in grinding and deburring both hard steel and soft metals. Also, you can use them for wood carving, cutting plastic, etc.

Syndent manufactures 6mm carbide burr in the past 11 years.

SA_6mm_Carbide_Burr

Cylinder 6mm carbide burr is ideal for contour finishing, flat surface removal.

SB_6mm_Carbide_Burr

Cylinder with end cut 6mm carbide burris suitable for removal contour and right-angled corners

SC_6mm_Carbide_Burr

Cylinder with radius end 6mm carbide burr is suitable for processing contour and arc surface at a certain angle.

SD_6mm_Carbide_Burr

Ball shape 6mm carbide burr is good for machining round edge and end pre-processing before brazing

SE_6mm_Carbide_Burr

Oval shape 6mm carbide burr is suitable for round edge removal

SF_6mm_Carbide_Burr

Tree with radius end 6mm carbide burr is perfect for grinding round edge in long and narrow positions

SG_6mm_Carbide_Burr

Tree with pointed end 6mm carbide burr is used for machining round arc contour in long and narrow places.

SH_6mm_Carbide_Burr

Flame shape 6mm carbide burr is good at round edge machining

SJ&SK_6mm_Carbide_Burr

Cone shape 6mm carbide burr functions like a countersink. Suitable for chamfering inner hole

SL_6mm_Carbide_Burr

Taper with radius end6mm carbide burr is widely used for round contour removal in narrow positions, and surface machining

SM_6mm_Carbide_Burr

Taper with pointed end 6mm carbide burr is suitable for narrow position deburring and counter surface machining

SN_6mm_Carbide_Burr

Inverted cone 6mm carbide burr is suitable for rear-side chamfering from the inner side.

Why Syndent 6mm Carbide Burr

Syndent 6mm die grinder bits are made with the highest cobalt-tungsten carbide materials. All of Syndent 6mm carbide burr has a 6mm spindle. Syndent designs 6mm carbide burr for 6mm chuck die grinders. No matter electric or pneumatic grinders, Syndent 6mm die grinder bits install well into them. If your chuck size is 1/4(6.35mm), please turn to Syndent 1/4 carbide burr.

You can also hear of 3/16 carbide burr, 3/8 carbide burr, 1 carbide burr, etc. These sizes mean the head diameter of the 1/4 carbide burr. Do not confuse head diameter with shank diameter.

Syndent 6mm carbide burr is ideal for deburring, drilling, shaping, and rough removal. And you can use them best for working on most hard materials, including steel, cast iron, aluminum, all types of stone, ceramic, porcelain, hard wood, etc.

1- 6mm Carbide Burr material
Material

Syndent will check the raw material specifications of 6mm carbide burr before production.

2- 6mm Carbide Burr brazing
Brazing

Syndent automatically brazes 6mm carbide burr with silver in a low temperature

3- 6mm Carbide Burr balance
Balancing

We must make the 6mm carbide burr jumping test after brazing. The tolerance is less than 0.1mm

4- 6mm Carbide Burr bending
Bending

Syndent examines the hardness of 6mm carbide burr shank after brazing, and tests the bending strength

5- 6mm Carbide Burr shaping
Shaping

Solid 6mm carbide burr needs a shaping process from the carbide rod materials

6- 6mm Carbide Burr toothing
Toothing

Syndent CNC grinds the 6mm carbide burr teeth after the tests approved

7- 6mm Carbide Burr polishing
Polishing

Syndent polishes the 6mm carbide burr shaft, and its brazing position

8- 6mm Carbide Burr package
Packaging

Syndent makes your logo on the 6mm carbide burr, and stick your own label on the case.

Testing

Catalog

Send Inquiry

Shipping

Related Products

  • Syndent has all the popular carbide cutters and shapes. Succeed in helping many customers save costs in the past decades.

  • Range from the dental laboratory to clinic purpose. Either a dental technician or dental doctor could find what you demand here.

  • You have creative nails through Syndent amazing nail carbide burrs. We can do better and think about what you think.

  • Syndent has all the popular carbide cutters and shapes. Succeed in helping many customers save costs in the past decades.

Your Best Supplier of 6mm Carbide Burr

Our 6mm carbide burr comes in a wide range of styles, including 6mm carbide burr for steel, 6mm carbide burr for inox, 6mm carbide burr for aluminum, 6mm carbide burr for fiberglass, etc.

Syndent has its own professional test laboratory. Your orders will be tested carefully before shipping. You must receive the best quality 6mm carbide burr.

We have had worldwide customers in the past 11 years. We can collect samples from all the famous companies in the world every year. Syndent can quickly develop or copy new flutes for your 6mm carbide burr.

Syndent has a super large production capability. We can ships your 6mm carbide burr sooner than 1 week.

Besides the 6mm carbide burr, Syndent also has 1/4 carbide burr, 1/8 carbide burr, 3mm carbide burr, 3/32 carbide burr, 1/16 carbide burr. You can custom your shank diameter too.

Get an instant quote for Your next 6mm carbide burr order now!

Your best 6mm carbide burr

6mm Carbide Burr: The Complete FAQ Guide

For over a decade, Syndent skilled staff produce tirelessly to manufacture carbide burrs from quality tungsten carbide raw materials. Through orders made from ever-reliable clients worldwide, we use our ever performing highly advanced 41 sets CNC machines. This helps us meet the existing demand from very many companies in China, America, Europe, and the rest of the world.

What is a 6mm Carbide Burr?

Also known as the 6mm die grinder bit, 6mm carbide burr refers to a solid carbide burr, designed for greater needs. Highly applied in metalworking as well as maintenance repairs. Syndent designs 6mm carbide burr from finest cobalt-tungsten carbide raw materials. You can rapidly remove stock and ideal burr for excellent chips flow.

All of the 6mm carbide die grinder bits Syndent manufactures feature 6mm spindle. We design the 6mm carbide burr suitable for 6mm chuck die grinder machines. You can find our 6mm carbide burrs in different styles.

For a chuck size of 1/4(6.35mm), you need 1/4 carbide burr.  Also, you can hear of 3/16 carbide burr, a 3/8 carbide burr, 1 carbide burr, etc.

titanium coated 6mm carbide burr

We own a professional test laboratory that helps us carefully test all your orders before shipping. This assures of ever great quality 6mm carbide burr for grinding, smoothening, shaping all hard and soft metals and materials.

Syndent 6mm carbide burr provides you with the highest operational efficiency without easy clogging. It offers the highest precision and accuracy in grinding and cutting without affecting the environment and the user.

Designed for all tooling needs, Syndent 6mm carbide burr requires simple set up and use. It makes your work much easier by reducing labor intensity. Also, our ideal 6mm carbide burr provides high safety functionality and reliability.

Syndent 6mm carbide burr can surprisingly rotate at great speeds when tied on die grinder machines. With many tasks, 6mm carbide die grinder allows faster operation within a short time. It puts you on a much higher production level when you have a lot of pending tasks that need quicker fixation.

How Can You Use 6mm Carbide Burr?

Manufactured in various shapes, Syndent 6mm carbide burr makes it possible to manage lots of materials and applications. With each dedicated shape and flute type, Syndent 6mm carbide burr can cut, deburr, enlarge holes, grind, shape, etc.

Shaping

With Syndent 6mm carbide burr, you can shape materials including aluminum, steel, hardened steel, copper, etc. Industries mold materials using different fluted 6mm carbide burr to desired shapes.6mm carbide burr shaping the steel

Grinding

Syndent 6mm carbide burrs have outstanding strength and hardness. Other than shaping, the burr also grinds ferrous and nonferrous materials.

To grind hard materials, you need a strong and high-performing tool. Syndent 6mm carbide burr has cemented carbide, a hard compound to cut but cuts and grinds tough materials without breaking. Built with sharp blade-like teeth, it can grind materials in different states quite easily to shapes and designs.

With enhanced cutting edges, Syndent 6mm carbide burr can rotate highly in die grinder. The rapid rotation and advanced cutting edges enable you to grind easily on materials.

Cutting

Syndent 6mm carbide burr has special sharp flutes that swiftly cut material like sharp blades. The blade-like flutes come in different cuts that cut any ferrous and non-ferrous material into desired manageable pieces.

The ideal 6mm carbide burr by Syndent allows you to have precise dimensions on materials when you cut into pieces. It makes your work much easier and quicker without waste of time.

Deburring

One of the major functions of 6mm carbide burr includes modifying workpieces by way of deburring. After cutting material, you need to remove left-out small pieces referred to as burrs.

Syndent manufactures a versatile 6mm carbide burr that fluently removes burrs on your workpiece. This leaves an attractive and smooth finish.6mm carbide burr deburring hardened steel

Hole-enlargement

In certain circumstances, industries use carbide burrs in increasing the diameter and indent of holes in workpieces. Special burrs by Syndent like 6mm single cut carbide burr precisely creates long chips on materials. This increases its depth and you can apply an appropriate burr to increase the diameter too.

6mm carbide burr, therefore, proves a highly versatile cutting, grinding, shaping, deburring, etc. tool an industry can’t lack. It doesn’t limit you on materials to work on.

Which Tool Can You Pair With 6mm Carbide Burr?

All Syndent 6mm carbide burrs manufactured include 6mm spindle. This specifically fits correctly in the chuck of die grinders. This means that it can as well fit in any electric and pneumatic rotary tool. For 1/4 (6.35mm) chuck sizes, switch to our 1/4 carbide burr.

Industries have different rotary tools they use to pair 6mm carbide burrs like high-speed engravers, micro motors, etc. No matter rotary tool you pair with, always fit them well in collet for best performance.6mm carbide burr fixed correctly

How Can You Correctly Pair 6mm Carbide Burr With Your Die Grinder?

Syndent produces most of its cutting tools to suitably fit automated tools. You can automate our 6mm carbide burr on a die grinder machine. We design them in popular standard designs which means you can also pair them with lots of other automated tools.

Normally, the shank part of Syndent 6mm carbide burr seats in the automated tool’s chuck. Then secured firmly using a wrench so that it doesn’t wobble. A wobbling carbide burr in a die grinder reduces its life expectancy and produces poor results.

Useful note: Always seek guidance from the manufacturer or use the manual for further guidance.

What Makes 6mm Carbide Burr a Good Cutting Tool?

Syndent keenly manufactures 6mm carbide burr through a computerized CNC machine. We introduce cobalt-tungsten carbide raw materials in the process as the main material. Our quality checking engineers observe every production process.

Syndent also ensures the best tolerance of Syndent 6mm carbide burr. We automatically braze silver to our 6mm steel shank to produce quality carbide burr. Our final product now has superior strength which now you can cut hard materials, even High Strength Steel (HSS).

This gives us a unique selling ability with many industries for our quality 6mm carbide burr. It serves multiple purposes and helps companies increase their production levels.wide ranges of 6mm carbide burr

Can 6mm Carbide Burr Cut Stone?

Yes.

Syndent 6mm carbide burr easily cuts, shapes, polishes, and deburrs stone and other materials. With the right rotary tool pairing, even hard materials like stone, appear soft and easy to cut. Our carbide burr can leave a very fine finish on your stone surface.

Stone features amongst hard materials to cut that require lots of concentration and patience. You also need much caution and takes a long time to finish the task because of compactness. If you don’t take precautions and concentrate, the burr burns up easily. Therefore, make stoppages between operations.

Instead of using 6mm carbide burr on stone, try out our die grinder stone bits. Made with grade material, it acts upon stone effectively.

Can 6mm Carbide Burr Cut Glass?

Yes.

Our 6mm carbide burr for fiberglass can cut, shape, grind and deburr glass to desired shape and smoothness. Other than glass, it can cut fiber cement, carbon fiber, resin, drywall, GRP, FRP, etc.

Syndent 6mm carbide burr for fiberglass leaves better finishes on material surfaces and has improved user control. You can try Syndent quality fiberglass router bit on glass and other materials for good better results.

Does 6mm Carbide Burr Cut, Shape, Grind Wood?

Industries use an appropriate 6mm carbide burr on wood in different ways including cutting, creating shapes, material removing, cutting, etc.

Specially designed Syndent 6mm carbide burr for wood features a very unique free, fast-acting action. This allows you to achieve equal cutting of wood knots and grains effectively. With the special design for wood, stone, bone, etc. you can finely carve, engrave and polish smooth-looking image faster.

Syndent high-performing carbide burr for wood carving efficiently engraves, carves, and smoothens wood. It has a similar flute design like the diamond cut which Syndent calls a woodcut. It gives you a high-efficiency operation on wood and doesn’t with no clogging.

Can You Cut Bones Using 6mm Carbide Burr?

Absolutely yes.

When thinking of Syndent 6mm carbide burr, always think of versatility. You can meet your demanding tasks like bone cutting, engraving, smoothening with 6mm carbide burr.

We naturally design Syndent 6mm carbide burr for wood and stone cutting with special geometry. Through our special CNC machine, we produce quality 6mm carbide burr that easily cuts hard tissue and bone. It can also remove debris a piece of work.

What Can 6mm Carbide Burr Also Cut?6mm carbide burr cutting metals quickly

Apart from wood, stone, fiberglass, and stone as earlier seen, Syndent 6mm carbide burr also can cut:

  • Steel
  • Cast iron
  • Ceramic
  • Aluminum
  • Porcelain
  • Hardened steel
  • Titanium
  • Copper
  • Nimonic Alloy
  • Brass, etc.

Who Uses 6mm Carbide Burr?

Because we make a versatile 6mm carbide burr, it has very uses in industries worldwide. The following consumers use Syndent 6mm carbide burr:

  • Sculptors
  • Grinders
  • Tool makers
  • Model engineers
  • Wood engravers and carvers

Used in:

  • Jewelry making
  • Wood carving and engraving
  • Dentistry
  • Contouring
  • Chamfering
  • Deburring
  • Grinding
  • Cylinder head porting

Can 6mm Carbide Burr Drill Materials?

Yes.

6mm carbide burrs enlarge the holes

Amongst other many uses of 6mm carbide burr features making drills on metals and different materials. Made with various flutes and designs, you can enjoy drilling materials with appropriate Syndent carbide burr.

Single cut 6mm carbide burr can drill wood, metals, and other materials because it works by creating long chips. It has a right-handed flute that goes up the burr for an up cut. This helps dig deep into your workpiece, creating the desired hole.

Thus, Syndent 6mm carbide burr can drill hardwood, hardened steel, cast iron, steel, all ferrous and non-ferrous materials.

You can only use 6mm carbide burr as an alternative tool for drilling. Otherwise, Syndent manufactures rotary file bit, special for drilling tasks. Syndent rotary file bits perform highly in drilling than other cutting or grinding tools, greatly embraced by our trusted customers.

What Advantages Come When You Use 6mm Carbide Burr?

Syndent 6mm carbide burr has many advantages when you buy and use it. When you buy from Syndent, our 6mm carbide burr gives the following advantages:

  • Offers long service to most applications
  • A versatile tool applied on many tasks and many materials
  • Great carbide burr that machines round edges, removes material, shapes, deburrs, etc.
  • Made from cemented carbide hence tough on extremely hard materials
  • Can work quite long in more demanding productions
  • Precision in cutting because of sharper blade-like cutting edges6mm carbide burr cone shape

Why Shouldn’t You Leave 6mm Carbide Burr Still for Longer?

As part of improving 6mm carbide burr’s life and efficiency on the tasks you perform, operate in a continuous motion. This removes material smoothly out of the material surface.

If you don’t observe this, the 6mm carbide burr at some point can stop digging correctly through your workpiece. It also stops jabbing and when this happens, it causes unsightly marks on your workpiece. In the end, the material surface of your tasks appears very rough.

Useful note: Consider ending your task with an upstroke. Ending task on upstroke finishes the workpiece smoothly.

Why Use Little Pressure and Not Too Much While Using 6mm Carbide Burr?

When using Syndent 6mm carbide burr with a die grinder to dig, cut or grind materials, concentrate greatly on guiding. Your work with 6mm carbide burr should remain very easy throughout your tasks. Because Syndent designs 6mm carbide burrs that make work easier. Therefore you need a simple technique of guiding and slightly low pressure.

Since we design our carbide burrs to operate with minimal pressure, an extra force can make it work otherwise. You can greatly reduce its performance and lifespan. You can even spoil your workpiece apart from causing rapid wear of cutting edges of the 6mm carbide burr.

Maximum concentration, simple technique, and little force play important roles in achieving a smoother material surface.6mm carbide burr with suitable pressure

6mm Carbide Burr Operates in How Many Cuts?

Basically, we have two popular cuts of Syndent carbide burr: single and double.

Single Cut 6mm Carbide Burr

Single cut 6mm carbide burr has a right-hand spiral flute that offers an up-cut on materials. An up-cut style can cut all ferrous metals, stainless steel, cast iron, hardened steel, copper, etc. With Syndent single cut carbide burr, you can quickly remove material. Industries prefer drilling materials using Syndent single cut 6mm carbide burrs because of creating long chips.

Ideal for:

  • Milling
  • Heavy stock removal
  • Creating long chips
  • Cleaning
  • Deburring

Double Cut 6mm Carbide Burr

Most popular cut you can ever find with 6mm carbide burr. The double cut 6mm carbide burr means a burr with two flutes, arranged to cross against each other. They tend to function on ferrous and non-ferrous metals. Commonly paired with die grinders to cut soft steel, aluminum, non-metal materials like wood, plastics, etc.

Ideally, it takes you through very many applications with much ease. Syndent 6mm carbide burr creates a smoother finish as opposed to single cut 6mm carbide burr. They actually produce very small chips when cutting away material.

Ideal for:

  • Medium-light material removal
  • Fine surface material finishing
  • Smooth finishing
  • Creation of small chips
  • Cleaning
  • Deburringdouble cut 6mm carbide burr

Can Manufacturers Recycle Worn Out 6mm Carbide Burr?

Yes.

Since the materials used in making 6mm carbide burr have no side effects on humans and the environment, Syndent recycles them. Syndent 6mm carbide burr and our other many products have cemented carbide in them. When they wear out, Syndent can transform the components and iron rods to form many useful consumer products.

For that case, we always advocate and advise our customers to deliver to us the used up Syndent products. This way, we keep our environment safe by recycling them.

Do We Have Different Shapes and Designs of 6mm Carbide Burr?

Yes.

Syndent has very many types of 6mm carbide burrs to choose from, for varied applications. They include cylinder 6mm carbide burr, ball shape 6mm carbide burr, oval shape 6mm carbide burr, etc.

Each of them has a versatile function on different materials and pairs well on most rotary tools.

Cylinder Carbide Burr for Wood Carving

Cylinder 6mm carbide burr greatly removes flat surfaces and ideal for contour finishes. Also called SA type.cylindrical 6mm carbide burr

Cylinder/End Cut 6mm Carbide Burr

SB type 6mm carbide burr includes a cut at its end, ideal in removing contours on most material surfaces. Effective tool in right-angled corners.

Cylinder with Radius End Burr for Wood

SC type 6mm carbide burr can neatly process contours on several materials and is ideal for arc surface at an angle.

Ball Shape 6mm Carbide Burr

Great 6mm carbide burr for fluent machining all round edges on different materials. The best burr in the final pre-processing of workpieces just before brazing.

Oval Shape 6mm Carbide Burr

Oval shape or SE Type 6mm carbide burr smartly removes all round edges on materials.

Tree/Pointed End 6mm Carbide Burr

Tree with pointed end 6mm carbide burr perfectly grinds round edges on various materials. You can grind in long as well as narrow places on your workpiece.

Tree-Radius End 6mm Carbide Burr

SF type or Tree-radius End 6mmcarbide burr machines round arc contours on given materials. You can comfortably machine both in long and narrow places.tree shape with radius end 6mm carbide burr

Flame Shape 6mm Carbide Burr

Flame shape 6mm carbide burr offers you the correct machining of round edges of your workpieces.

Cone Shape 6mm Carbide Burr

The SJ & SK type 6mm carbide burr has the same function as the countersink. Used to chamfer inner holes.

Taper with Radius 6mm Carbide Burr

A popular carbide burr with most stone and wood engravers for carving and shaping wood and stone. Helps in removing round contours by working through narrow places. It also finely machines material surfaces.

Taper with Pointed End 6mm Carbide Burr

Used in industries widely to machine through narrow places and on counter surfaces.

Inverted Cone 6mm Carbide Burr

Popular burr industries apply in chamfering rear sides of workpieces from inside.

Do 6mm Carbide Burrs Manufacture in Different Sizes And What of RPM?

True.

Syndent manufactures several orders of 6mm carbide burrs in sizes of 2.4mm, 3.0mm, 6.0mm, etc. They all have RPM which you can apply when using them.

NoBurr SizeRPM
12.4mm17,000 – 26,000
23.0mm17,000 – 26,000
36.0mm11,000 – 16,5000
413.0mm8,000 – 12,000
516.0mm7,650 – 11,500

different sizes of the 6mm carbide burr

Each of the Syndent 6mm carbide burr sizes indicated above have low and high recommended speeds. You should operate within the stipulated minimum and maximum range for better performance and results. This helps in reducing the chipping of the carbide burr.

Useful note: The best way to operate Syndent 6mm carbide burr is to start with low speed. Then increase gradually as you go along the task.

Is It Worth Buying 6mm Carbide Burr?

Absolutely true.

Syndent 6mm carbide burr comes along with many benefits because of multiple features and functions.

They include:

  • Designed from a selection of high-grade raw materials including tungsten and carbide according to international industrial standards.

Syndent qualified staff keenly asses and selects quality materials we order from top suppliers. Only selected quality materials enter into our warehouse, to begin with production. Syndent ensures it produces a strong enough 6mm carbide burr, difficult to break on whatever task.

  • Syndent makes different 6mm carbide burr shapes and sizes. They come in various shank sizes and head diameters to suit several applications.6mm carbide burrs worth your purchase

Now you can freely choose a head diameter with a shank size that meets your tasking demands. You generously improve on output and increase the overall performance of the 6mm carbide burr.

  • Our emphasis at Syndent is to continually make 6mm carbide burrs, ideal in producing accurate dimensions.

Therefore, choosing a quality Syndent 6mm carbide burr can highly guarantee balanced tolerance results on your workpiece.

  • Besides quality, Syndent pays close attention to market price in relation to versatility.

With multitude of functions of Syndent 6mm carbide burrs, you cost-effectively cut, grind, deburr, shape and polish cost-effectively. If you order many 6mm carbide burr from us, you even save more.

  • Syndent produces highly versatile 6mm carbide burr, for different applications and on various materials.

It gives freedom to cutting, cleaning, grinding, polishing, etc. The functions apply on ferrous and non-ferrous materials such as hardened steel, cast iron, copper, stone, porcelain, hardwood, etc.

  • Syndent 6mm carbide burr also comes with greatly improved working efficiency in the functions provided.

We make our 6mm carbide burrs with extremely sharp different flutes. They cut hard materials like blades, efficiently grind, deburrs, engraves, carves, etc.6mm carbide burr

How Do You Process 6mm Carbide Burr?

Syndent has a continuous production process that ensures we fulfill the demands of our ever-existing customers. We maintain our policy of continued supply of high-performing and high-quality 6mm carbide burrs and other similar products.

In that regard, we deploy experienced professionals and use computerized CNC machines to maintain quality. Our 6mm carbide must follow an entire process to receive every detail needed.

The process features:

Evaluating Materials

As part of quality standards, we get raw materials from the best material supplying companies. The companies mine materials from their own mining firms. Upon receiving, we analyze tungsten carbide material and accept high-grade in our warehouse.

Brazing

After receiving grade materials, we braze 6mm carbide burr material and silver together. We only apply low temperature on the two materials but in a uniform manner.

Balancing

We then use the jump-testing method to balance our 6mm carbide burr for tolerance. The tolerance level should lie below 0.1mm. Since we inspect and service our machines regularly, we always get the best tolerance.test the balance of the 6mm carbide burr

Bending

With most of the details acquired, Syndent 6mm carbide burr has a strong shank to manage tooling impact. We give the 6mm carbide burr a bend to a certain limit to ascertain maximum strength.

Shaping

Syndent gives the 6mm carbide burr the desired shape by grinding.

Toothing

Syndent gives 6mm carbide burr cutting and grinding teeth in form of sharp flutes. Computerized CNC machines produce different flutes on our 6mm carbide burr by grinding.

Polishing

With our 6mm carbide almost ready, we polish and add abrasive.

Packaging

Here, the 6mm carbide burr has all the relevant features of a quality cutting burr. We add a logo and then pack and ship accordingly.

Which Safety Tips Should You Consider While Using 6mm Carbide Burr?

Syndent 6mm carbide burr needs maximum care so that it serves you better and lasts longer. Your safety when using the tool also matters a lot. Therefore, always use the 6mm carbide burr correctly and observe safety tips to avoid accidents.

Observe the following:

  • Pair the shank end of the burr with the rotary tool’s chuck so that it holds firmly without wobbling
  • When using on any application, guide the 6mm carbide burr, applying low pressure. Allow the highest material to come first
  • To get the performance of the burr, hold your workpiece firmly in a workpiece for easy operation
  • To reduce chances of chipping, don’t snag the 6mm carbide burr or jam it
  • Protect your eyes against particles from a workpiece by wearing goggles. Cover the entire face with face shield and gloves for four handssaftey tips of the 6mm carbide burr

What Should Guide Me in Choosing Quality 6mm Carbide Burr?

A quality 6mm carbide burr means one that has several top and useful features. It should see you through most demanding tasks cost-effectively and doesn’t wear out quite easily. Because the market has flooded carbide burrs, choosing a quality one sometimes seems a tricky thing.

To stand a better chance of choosing a quality 6mm carbide burr, consider the following top features:

Meticulousness– By all means, the 6mm carbide burr you choose should undergo a vigorous production process. Syndent 6mm carbide burr has a meticulous design. This means it handles any work designed since we considered industrial quality standards.

Durability– You also want a tool that serves you best for a long time without wearing out easily. Syndent 6mm carbide burr has high durability.

High-temperature tolerance– Sometimes a carbide burr can grow extremely hotter when in operation. If it doesn’t have strength and hardness, you need to stop until it cools down then start again. Syndent 6mm carbide burr features cemented carbide, a very hard and heat-resistant compound. You can continuously work without minding breakdown due to heat.

Accuracy/Stability – A good 6mm carbide burr should offer high precision cutting or grinding. Our Syndent 6mm carbide burr comes with very sharp cutting edges and great stability that precisely cuts materials.

Weight/Versatility – A versatile 6mm carbide burr considerably helps in managing very many tasks cost-effectively. You don’t need several other burrs if you buy our lightweight 6mm carbide burr since it serves multiple tasks. Syndent 6mm carbide burr offers excellent user control because of its lightweight.

Strength – Although light in weight, the 6mm carbide burr constantly performs on all tasks designed for. You can strongly apply Syndent 6mm carbide burr on ferrous and non-ferrous because it has high density and strength.

How Can You Remove Deposits From 6mm Carbide Burr?

To ensure the 6mm carbide burr lasts longer and performs effectively on all tasks, you should carry out routine care. This involves frequent cleaning after every use using the correct method. A carbide burr with clogged materials slows down its performance and might easily burn up.

Basically, we have two popular methods applied to efficiently clean 6mm carbide burr. You can either use concentrated muriatic acid or the ultrasonic method.

With muriatic acid, you first need to chip off material deposits (aluminum) from the burr. With a jar of muriatic acid, immerse the 6mm carbide burr and let it settle for 10 or more minutes. The deposits dissolve in the acid, leaving the 6mm carbide burr sparkling clean. This applies to a carbide burr with aluminum deposits only.

Otherwise, for the rest of the metal deposits, the ultrasonic removes them fluently. First, grip the 6mm carbide burr firmly in a holder so that it doesn’t break when you apply the process. And for the next 2 or minutes, run the 6mm carbide burr through an enzymatic/cycle cleaner. Use 2 minutes again to rinse the burr to attain its original shine.

Useful note: Always store Syndent 6mm carbide burrs in their respective packaging after using and cleaning. This reduces the chances of the flutes chipping due to contact with others.

What 6mm Carbide Burr’s Lead-time That Affects Production?

The following few things can affect the way and time frame we manufacture our 6mm carbide burrs:

Standard design: This majorly affects production because Syndent manufactures simple and complex 6mm carbide burrs. A simple designed 6mm carbide burr can take the least production time compared to a complex. Because it has fewer features.standard design of 6mm carbide burr

Customized demands: Some of our clients desire to have their products customized. As a result, they have more features than standard 6mm carbide. We, therefore, adjust our CNC machines accordingly to adapt to the extra features. This takes more time.

Order quantity: As a manufacturing company that supplies many quality carbide burrs all over the world, we take many orders. Most demand us fulfilling pending large quantities. This hugely affects production and delivery because of the packaging and documentation process.

Pending orders: We handle orders from top companies in the US, Europe, and the rest of the world. We serve you according to how orders stream in. If you order earlier, we deliver faster. We also offer rush orders for quick deliveries at a cost.

Can You Engrave Artwork on 6mm Carbide Burr?

Yes.

We do engrave artwork on 6mm carbide burr according to your wish. Artwork engraving happens only after polishing. You can as well have modification of the current artwork you have from our experts.

Why Should I Choose Syndent 6mm Carbide Burr?

Syndent manufactures 6mm carbide burr using top cobalt-tungsten carbide raw materials. We make in styles of 6mm carbide burr for steel, 6mm carbide burr for fiberglass, etc. We ensure any 6mm carbide burr style passes a vigorous professional laboratory test for quality assurance.

Apart from 6mm carbide burr, Syndent can deliver you with 1/8 carbide burr, carbide burr set, etc.

Get an instant quote for your next 6mm carbide burr order now by contacting us.

Send Your Inquiry Today
Scroll to Top