SF 5 Carbide Burr Manufacturer
- Dedicated to SF 5 carbide burr production over 11 years.
- 41 sets of 6 axis CNC machine promise fast shipping
- Most of the clients come from Europe and America
- Excellent performance on cast iron and welding slag, etc.
Syndent SF 5 Carbide Burr
Syndent can custom design the flute geometry according to your special application demands. It must bring you the exact finishing results you needed.
SF 5 carbide burr, also named tree shape radius end carbide burr. In Germany or some European area, you will find its type name is RBF 1225.
Our SF-5M is perfectly used for removing, deburring, and finishing many contoured surfaces. You can widely use SF-5M in steel dies, molds, hard metals, and all other hard materials.
Syndent SF 5 carbide burr is also ideal used for welding surface preparation and welding slag removal.
We manufacture SF 5 carbide burr for the past 11 years.
S/C cut SF 5 carbide burr is ideal for general purpose fluting. Produces long chips.
D/C SF 5 carbide burr is suitable for very efficient stock removal. Creates a small chip. Good finish. Excellent operator control.
Alu cut SF 5 carbide burr is suitable for nonferrous materials. Aggressive stock removal.
Why Syndent SF 5 Carbide Burr
Syndent produces SF 5 carbide burr with top-quality tungsten carbide alloy steel. You will certainly benefit from its high sharpness and durable life. You can also call it SF carbide ball-nosed or rounded tree burr. The general type number is SF-5 or RBF1225.
SF 5 carbide burrs are used in a high-speed die grinder. Syndent SF 5 carbide burr is definitely suitable for you to grind carbon steel, hard steel, stainless steel, cast iron, brass & aluminum, and other non-ferrous materials.
Syndent has both inch and metric size SF 5 carbide burrs. No matter which location you are in, we can offer you with related exact size of SF 5 carbide burrs.
For the USA and Canada and Australia, Syndent manufactures SF 5 carbide burr with inch size.
SF-5 Carbide Burr mounted on 1/4″ Shank
Diameter: 1/2″; Length of Flute: 1″; OAL: 2 3/4″
For the countries and areas that exclude the USA and Canada and Australia, Syndent makes SF-5 carbide burr with metric size.
SF-5 Carbide Burr mounted on 6mm or 8mm Shank
Diameter: 12mm; Length of Flute: 25mm; OAL: 70mm
- Manufacturing
- Testing
- Catalog
- Send Inquiry
- Shipping

Syndent will check the raw material specifications of SF 5 carbide burr before production.

Syndent automatically brazes SF 5 carbide burr with silver in a low temperature

We must make the SF 5 carbide burr jumping test after brazing. The tolerance is less than 0.1mm

Syndent examines the hardness of SF 5 carbide burr shank after brazing, and tests the bending strength

Solid SF 5 carbide burr needs a shaping process from the carbide rod materials

Syndent CNC grinds the SF 5 carbide burr teeth after the tests approved

Syndent polishes the SF 5 carbide burr shaft, and its brazing position

Syndent makes your logo on the SF 5 carbide burr, and stick your own label on the case.
Testing
Catalog
Send Inquiry
Shipping
Your Best Supplier of SF 5 Carbide Burr
Syndent divided SF carbide burr into different types on the basis of flutes, including single cut SF 5 carbide burr, double cut SF 5 carbide burr, steel cut SF 5 carbide burr, inox cut SF 5 carbide burr, and non ferrous SF 5 carbide burr, etc.
You can also have extended shank SF 5 carbide burr, solid SF 5 carbide burr, and flexible shank SF 5 carbide burr from Syndent.
In addition, you will be able to find cylindrical carbide burr, carbide ball burr, cone carbide burr, oval burr, flame burr, etc.
Although Syndent SF 5 carbide burr is made with automatic CNC machines, our QA team must engross in quality control, and test the finished tree shape radius end carbide burr from different points, like durable life, sharpness, brazing strength, etc. So that Syndent can always offer you the best SF 5 carbide burr, and make your tough jobs easier.
Send us your inquiry for Syndent SF 5 carbide burr now!
SF 5 Carbide Burr: The Complete FAQ Guide
Sometimes we call the Syndent SF 5 carbide burr as the tree shape radius end carbide burr. In countries like Germany or other European regions, they call the same type as RBF 1225.
Our SF 5 carbide burr has many uses. Let’s have some time to explain everything you need about our ideal SF 5 carbide burr.
What is SF 5 Carbide Burr?
SF 5 carbide burr refers to a burr made from top-notch tungsten carbide alloy steel. You can use the SF 5 Carbide burr on various metals.
Also, you can call our ideal burr as SF carbide rounded tree or SF carbide ball-nosed burr. The burr has a general type number of SF-5 or RBF1225.
The SF 5 carbide burr removes, grinds, deburrs, and finishes various contoured surfaces. Suitable for use in molds, hard metals, dies as well as all hard metals and materials.
Widely used in welding to prepare welding surface and removal of welding slag.
The rotary file has a unique design that allows the tool to rotate relatively faster. The burr gives you the freedom to perform specific tasks on each handpiece to achieve desired shapes or designs.
You can use the SF 5 carbide burr to machine various contours in long or narrow areas of the handpiece.
Widely used in modern industries, most engineers or fabricators use Syndent SF 5 carbide burr for precision and efficiency.
What are the Different Uses of SF 5 Carbide Burr?
As earlier mentioned, our SF 5 carbide burr mainly grinds, removes, deburrs and finishes several contoured surfaces. However, the uses of SF 5 carbide burr vary from one sector to another.
The following indicates various ways how you can use SF 5 carbide burr in various sectors:
Shaping
SF 5 carbide burr basically grinds, deburrs, removes, and finishes a number of contoured surfaces. You can use the SF 5 carbide burr on different material surfaces.
You can shape your handpiece by eliminating unwanted material to desired shapes or designs. Different industries nowadays shape materials with SF 5 carbide burrs.
Grinding
The SF 5 carbide burr also grinds several material surfaces. The procedure includes eliminating the unnecessary extra elements from the specific handpiece.
The SF 5 carbide has a very tough and hard compound known as cemented carbide. Built-in a form of sharp tooth, the SF 5 burr cutting edges work as blades.
Featuring high-speed rotation, you can continually grind your handpiece in any desired shape with SF 5 carbide burr.
Cutting
You can use the SF 5 carbide burr to slice through different kinds of metals or materials. Industries that use SF 5 carbide burrs divide materials into small pieces. You can easily and smoothly work on manageable material sizes, dimensions, and shapes.
SF 5 carbide burr offers precision cutting on materials.
Deburring
The other major function of SF 5 carbide burr includes deburring. The procedure involves modifying a given handpiece as the main function.
You can remove any sharp edge or burrs from a specific handpiece using ideal SF 5 carbide burr.
Enlarging holes
Hole-enlargement features the process of increasing hole-indent on given handpieces.
Removing Materials
You can use SF 5 carbide burr to remove cast iron, hard metal or steel fluently. You work easily with SF 5 carbide burr than working hard with various materials.
You can therefore do different machining functions with your ideal SF 5 carbide burr. The ability to handle multiple functions makes SF 5 carbide a multi-purpose tool as seen in the uses above.
Which Tools do We Use with SF 5 Carbide Burr?
You can use carbide burrs in different tools. You can use in Air Tools including Die Grinders, top speed engravers, and Pneumatic tools. You can use carbide burrs in Micro Motors, Flexible Shafts, and Pendant Drills or in hobby rotary tools like Dremel.
You can use our ideal SF 5 carbide burrs on high-speed die grinder tools. When used on a high-speed die grinder, you can grind various hard and soft metals.
Useful note: When using the SF 5 carbide burr with a high-speed grinder, let the handpiece run true.
Which Materials Can You Use SF 5 Carbide Burr on?
You can grind, deburr, or remove unnecessary elements on either hard and soft metals or materials.
You can perform different functions with SF 5 carbide burr on metals like:
- Carbon steel
- Stainless Steel
- Cast Iron
- Hard Steel
- Gold
- Aluminum
- Ceramics
- Wood
- Plastic
- Fiberglass
- Cobalt
- Nickel
- Titanium
What Makes SF 5 Carbide Burr Special to Cut Various Materials?
We manufacture SF 5 carbide burr from carbide using automated CNC machines. The carbide features a combination of carbon and tungsten elements.
When we mend the two elements together, we create a quality alloy. The quality alloy resists high temperatures, scratches, rust and pitting.
The hardness of SF 5 carbide burr looks similar to the diamond burr. The burr has high density and more strength.
The SF 5 carbide burr surpasses that of steel, almost three times. The tool’s high density and hardness help in slices various materials with much ease.
The burr doesn’t wear out easily and offers a smooth working experience. Syndent offers competitive prices for SF 5 carbide burrs. You can find our ideal tools either locally or internationally.
Can SF 5 Carbide Burr Cut and Shape Stone?
Not recommended to use SF 5 carbide burr on stone, although used by some people.
Ideally, you will take a long time to remove rough surfaces with SF 5 carbide burr. Secondly, the ideal SF 5 burr will start to burn up rapidly. Your burr, therefore, wears out faster and leaves unpleasing work.
However, we have alternative router bits designs made from various special grades. Router bits designed from special carbide grades works perfectly on extremely hard materials like stone.
Useful note: Only use quality diamond burrs to cut, shape stone or other extremely tough materials like glass. Avoid using SF 5 carbide burr on stone.
Can SF 5 Carbide Burr Cut Glass?
SF 5 carbide burr can cut, shape glass although we highly don’t recommend it. The SF 5 carbide features high density and reasonable strength to cut or shape hard or tough materials.
Our ideal SF 5 carbide burr features superior tungsten and carbon compounds. However, we recommend that you class or shape glass with specially designed diamond carbide burrs.
Can SF 5 Carbide Burr Cut and Shape Wood?
Absolutely true.
You can cut and also make shapes on pieces of wood perfectly. Syndent carbide provides ideal SF 5 carbide burrs for wood engravers to cut or make various designs on wood.
With hard wood, use diamond burrs.
Can SF 5 Carbide Burr Cut Steel?
Yes.
Tungsten SF 5 carbide burr, simply called carbide in building trades. Composed of equal measures of tungsten compound and carbon, the burr has three times hardness than steel.
When placed in die grinders or other reciprocating tools, the SF 5 carbide burr cleanly cuts through steel like butter.
SF 5 carbide burr works even better than High-Speed Steel. At extreme high temperatures, HSS burrs start softening easily than SF 5 carbide burrs.
Therefore, SF 5 carbide burr offers extended performance on specific materials used on.
Who Qualifies to Use SF 5 Carbide Burr?
Any person or industry can use SF 5 carbide burr in several ways. Engineers, wood carvers, model engineers, and metal workers use SF 5 carbide burrs in their routine jobs.
Also, SF 5 carbide burrs works perfectly in head porting of cylinders, tool making, welding, deburring sculpturing, and grinding.
Industries such as Automotive, metal sculpturing, metal smith, aerospace, and others use SF 5 carbide in various ways.
Can SF 5 Carbide Burr Drill Materials?
Yes.
You can use SF 5 carbide burr to make drills on materials although not highly recommended. Since the burr has a ball-nose or round tree shape, you can perfectly drill specific materials.
Industries dealing with wood carving and metal engraving use SF 5 carbide burr in their processes.
You can use the Single cut SF 5 carbide burr for producing long chips and better results.
When using the burr for drilling, ensure the handpiece runs true and doesn’t wobble.
What Are the Advantages When You Use SF 5 Carbide Burr?
- SF 5 carbide burr lasts longer
- Works effectively in extended production runs
- Very efficient in stock removal
- Creates a small chip with good and smooth finish
- Offers general fluting functions
- Offers perfect operator control
- Effective on various materials
Why Shouldn’t You Keep SF 5 Carbide Burr Still for Long?
We use our SF 5 carbide burr on die grinders. And we recommend to keep the burr in motion and not still for long.
SF 5 carbide burr in prolonged stillness, halts the tool from jabbing effectively. Also, your SF 5 carbide burr stops digging into a specific handpiece.
As a result of the non-efficiency of the burr, the workpiece becomes rough with unsightly marks. Also, you reduce the lifespan of SF 5 carbide burr.
Useful note: To get a finer as well as a smoother finished handpiece, complete the task on an upstroke note.
When you use SF 5 carbide burr on cast iron, the metal de-clogs your SF 5 carbide burr effectively.
What Are the Effects of Exerting Extra Pressure While Using SF 5 Carbide Burr?
When using SF 5 carbide burr on a specific handpiece, use the required pressure only. Little or right pressure improves Sf 5 carbide burr’s efficiency and increases longevity.
The effects of using too much pressure to have the following effects:
- Short burr lifespan
- Prematurity in handpiece smoothing
- Chipping in cutting edge of the flute.
Is SF 5 Carbide Burr Raw Material Safe to Environment?
Syndent uses quality solid carbide to design quality products. The QA team work with cemented carbide as well as Iron rods in welding other products.
Carbide burr features an iron and a solid carbide. Relevant processing department can recycle the two materials. They don’t cause environmental harm.
You pick and hand over worn-out SF 5 carbide burrs to the processing unit nearby. The unit has the responsibility of converting worn-out burrs into other useful products. The SF 5 carbide burr is therefore safe for the environment.
Do We Have Different Types of SF 5 Carbide Burr?
Syndent has designed SF carbide burrs into various types based on flutes. They include single cut SF 5 carbide burr and INOX cut SF 5 carbide burr. We also have non-ferrous SF 5 carbide burr, Steel cut SF 5 carbide burr, and so on.
Let’s have a look at each of them:
Single cut SF Carbide Burr
You can use S/C SF 5 carbide burr in the general fluting function. You can produce long chips with this burr type.
Double Cut SF 5 Carbide Burr
The D/C SF 5 carbide burr removes stock efficiently. You can create small chips with D/C SF 5 carbide burr and make good finishes on the handpiece. The burr also offers proper operator control.
Aluminum SF 5 Carbide Burr
The aluminum SF 5 carbide burr works well on non-ferrous materials. The burr removes stock on the handpiece aggressively.
Additionally, we manufacture flexible shank SF 5 carbide burr, solid SF 5 carbide burr, and extended-shank SF 5 carbide burr.
In addition, Syndent has carbide ball burr, flame burr, cylindrical carbide burr, and oval burr, and so on.
Which Technique Best Works for SF 5 Carbide Burr For Long Life?
When working with your SF 5 carbide burr, allow your tool to do the job. Because you consider the longevity of the burr, apply the required pressure. Little pressure works well for your tool than full pressure.
Little pressure reduces the chances of cutting the edge of the flute chipping off. A lot of pressure cause unreasonable smoothness.
While little pressure adds life to the burr, too much pressure reduces its life.
If properly used with low pressure, the SF 5 carbide burr can function well on much-demanding jobs. Also, the ideal burr offers high performance in hot temperatures and extended performances.
Can You Get SF 5 Carbide Burrs in Several Sizes and Their Respective RPM?
The table below indicates sizes of SF 5 carbide burrs and respective RPM:
No | Burr Size | RPM |
1 | 2.4mm | 17,000 – 26,000 |
2 | 3.0mm | 17,000 – 26,000 |
3 | 6.0mm | 11,000 – 16,500 |
4 | 13.0mm | 8,000 – 12,000 |
5 | 16.0mm | 7,650 – 11,500 |
Syndent manufactures metric as well as the inch size SF 5 carbide burrs. Depending on your country location, Syndent can provide a similar SF 5 carbide burr.
Syndent designs SF 5 carbide burr that features inch size for countries like the US, Canada, and Australia.
We have SF-5 carbide burr that mounts on ¼” shank, has ½” diameter, 1” flute length, and 2 3/4” OAL.
For other countries other than the US, Canada, and Australia, Syndent designs metric size SF 5 carbide burrs.
In this case, we have SF 5 carbide burr that mounts on a 6mm or 8mm shank. The burr has 12mm diameter, 25mm flute length, and 70mm OAL.
Always recommended RPM on each SF 5 carbide used. You can get the right RPM from manufacturers.
With the right RPM, you can get quality SF 5 burr performance. You also achieve likable results on each handpiece at hand.
Useful note: Manufacturers insist on starting with low speeds for better performance. You can then increase speed gradually to the required RPM. Never exceed required RPM.
The relative speed that you can use on a big-sized SF 5 carbide burr shouldn’t go more than 35,000 RPM.
How Best Can You Fit SF 5 Carbide Burr on Die Grinders?
In the case of SF 5 carbide burr, we prefer fitting on die grinders. You can tighten with a wrench and fix the SF 5 carbide burr to die grinders or other machines. You can also use SF 5 carbide burr in a handheld manner.
To use SF 5 carbide burr, pair SF 5 burr’s shank sides in your automated tool or die grinder.
Use a manual guide to help you fit SF 5 carbide burr on your die grinder machine. Always follow safety measures during the exercise to avoid damaging the tool and yourself.
If fitted correctly into the grinder, the SF 5 burr lasts longer and offers improved performance.
Is SF 5 Carbide Burr Worthy Buying?
Yes.
Several benefits of SF 5 carbide burr makes it worth buying.
Some reasons that you can find SF 5 carbide burr worth buying include:
- Has a blend of both tungsten and carbon compounds that meet required international standards.
With the tungsten and carbon mixture, the SF 5 carbide burr has enough strength to reduce breaking possibilities.
- You achieve precise dimensions in different tooling process with SF 5 carbide burr.
Because of the right SF 5 carbide burr, you get well-balanced handpiece tolerance.
- Syndent offers various sizes and shapes you can choose from.
Multiple options give the freedom to choose SF 5 carbide burr that works best for your specific job demands.
- SF 5 carbide burr gives users a cost-effective way of perfect deburring as well as grinding.
SF 5 carbide burr gives the user many ways of performing tasks on a handpiece. There is a reasonable amount you can save when you buy SF 5 carbide burrs in larger quantities.
- The SF 5 carbide is versatile. You can task numerous applications with SF 5 carbide burr and get great results.
- You experience improved efficiency overall for the functions you have. Relative sharpness gives much improved SF 5 carbide burr efficiency.
What is the Process of Manufacturing SF 5 Carbide Burr?
Syndent SF 5 carbide burr passes through a manufacturing process that is very intense. The aim targets a quality SF 5 carbide burr that meets quality international standards.
The process includes carbide, a blend of carbon and tungsten components. The process gives the SF 5 carbide meticulousness.
The process involves the following step by step procedures:
Material Evaluation
Before the process begins, Syndent evaluates SF 5 carbide burr raw materials. Tungsten and carbon materials proceed via minimum needed quality standards. We then select only grade materials to proceed to the next step.
Brazing
In this step, we braze together two metals uniformly. The metals involved include SF 5 carbide burr and silver in low temperatures.
Balancing
After brazing, we must do the jumping test of SF 5 carbide burr. Here, we ensure our ideal SF 5 carbide burr has 0.1mm or less tolerance before proceeding to the next level.
Bending
In this process, we examine SF 5 carbide burr shank’s hardness. In this case, Syndent tests SF 5 carbide burr’s strength.
Shaping
Here, we need to have the desired shape of our ideal SF 5 carbide burr from carbide rod elements. We therefore uniformly grind the tool to the desired shape.
Toothing
The main aim here is to give the burr teeth or blades that determines the type of the burr. To acquire SF 5 carbide burr teeth, Syndent CNC grinds the tool. They do this after tests approval.
Polishing
Before packaging, Syndent smoothens and polishes SF 5 carbide burr’s shanks and the brazing position. Partly finishing, polishing features abrasive material.
Packaging
Syndent’s final stage of manufacturing SF 5 carbide burr before sending to relevant customers. We make SF 5 carbide burr’s logo and stick the company’s label.
How Many Cuts Can You Use With SF 5 Carbide Burr?
We have two basic cuts to choose from when using SF 5 carbide burr. They include Single Cut (S/C) and Double Cut (D/C).
Single Cut
You can apply a single cut on various materials. You can use it on cast iron, hardened steel, copper, stainless steel, and other ferrous materials.
SF 5 Single Cut extracts material quickly leaving a smooth finish.
Suitable for:
- Cleaning
- Removal of heavy stock
- Milling
- Deburring
Double Cut
Ideal cut on either ferrous or non-ferrous metals. Used on metals such as soft steel and aluminum. Also, suitable for non-metals like plastics, ceramic, stone, and hard wood.
The cut provides a greater cutting edge and extracts unwanted material faster. The specific cut leaves a very smoother finish compared to a single cut. Because double cut produces smaller chips while cutting through materials.
Ideal for:
- Removal of medium-light stock removal
- Deburring
- Cleaning
- Finishing
What Are Safety Tips That Guides Us While Using SF 5 Carbide Burr?
We recommend all SF 5 carbide burr users to remain safe while using our products. Following the safety tips provided ensures the correct use of SF 5 carbide burr and your safety. Correct application extends your life as well as the burr’s life.
Follow the following safety tips:
- Insert your SF 5 carbide burr correctly in a collet, clamping it tightly
- Use little pressure and let SF 5 burr do its work. The highest material comes ahead
- Securely tighten the handpiece onto your workbench
- Never jam or snag SF 5 carbide burr in the given job
- Wear safety gear as a minimum requirement to cover your eyes with a full shield covering the whole face
What Features Essentially Guides Buyers for Quality SF 5 Carbide Burr?
Syndent SF 5 carbide burr has numerous quality characteristics. The current market has several SF 5 carbide burrs. Choosing quality SF 5 carbide burr from hundreds or thousands burrs can sometimes prove a hard task.
As a result, we looked for essential features that can guide buyers looking for quality SF 5 carbide burrs. We included the following approaches so that you can differentiate our quality product from the rest.
Meticulousness – Look whether the SF 5 carbide burr has meticulousness or not. The ideal SF 5 carbide burr passes via various stages of industrial standards.
The SF 5 has to pick any relevant detail to depict a suitable specific application designed for.
Durability – Your SF 5 carbide burr should have durability features. The tool should offer tolerance to required tooling conditions.
The SF 5 carbide burr should have the required strength to hold up to tooling conditions at a specific time.
High-temperature Tolerance – High-temperature tolerance means the SF 5 carbide burr lasts longer and provides better performance.
When the SF 5 carbide burr grows hotter, you can still continue tasking with your tool for a longer period.
How Can I Clean SF 5 Carbide Burr?
If you use the SF 5 carbide burr on aluminum metal, begin by chipping the aluminum off. Follow up by immersing the SF 5 carbide burr in muriatic acid. The muriatic acid effectively dissolves aluminum.
This method only dissolves aluminum deposits. You cannot use this method to dissolve metals like carbide, brazing, steel or other materials.
Also, caustic soda/sodium hydroxide does the job perfectly.
Alternatively, you can use ultrasonic cleaning. We highly recommend ultrasonic cleaning because you clear off all residues left on the burr.
To avoid damaging the SF 5 carbide burr, hold tightly in a holder or on a block. Then run SF 5 carbide burr in cycle/enzymatic cleaner. This should take 10 or more minutes. Finally, rinse well with cold water for not less than 2 minutes.
When you use SF 5 carbide burr on your cast iron handpiece, the handpiece de-clogs SF 5 burr.
What is SF 5 Carbide Burr’s Average Lead-Time That Influences Its Processing?
We have quite a number of important factors influencing its lead-time processing.
The factors comprise of:
Standard Designs – A standard designed SF 5 carbide burr takes a very simple process. The process, therefore, takes the least time of all to come up with the final product.
If you flip the coin, customized SF 5 carbide burrs take the most time. Because they require complex processes.
Because of different processes, we adjust processing machines differently. Each adjustment determines the process type. We make light machine adjustments to process standard SF 5 burrs.
Customized Demands – Before we commence with processing complex SF 5 carbide burrs, machines require more adjustments.
Complex designs or shapes of SF 5 carbide burrs, therefore, takes more time than standard products.
Order Quantity – The delivery time frame depends on the amount of products you order. Large quantity orders take longer periods for deliveries. Small amounts take the least period of time of delivery.
Pending Orders – Sometimes manufacturers receive several orders from different clients, locally and internationally. Your order, therefore, queues according to orders ahead of yours.
If your order comes amongst the earliest orders, you get served earlier. However, if it is amongst the last, your wait becomes longer.
For the sake of urgent buyers, Syndent offers the rush order service. The service comes at an extra price. However, your delivery process begins upon earlier arrangements.
Can My SF 5 Carbide Burr Feature Artwork?
Yes.
You can have your SF 5 carbide burr have artwork on it. You can have your burr engraved with texts, logo, or numbers. The artwork comes after doing the polishing.
Can I Have Customized SF 5 Carbide Burr?
Yes.
Syndent provides customized SF 5 carbide burrs for its clients. You can have the desired shape, desired design or desired length.
Having customized SF 5 carbide burrs help in special specifications in more variations.
With customized SF 5 carbide burrs, users find ease in effecting respective demands. In this case, a producer needs a blueprint to effect customization.
What Features Do a Quality SF 5 Carbide Burr has?
Ideal SF 5 carbide burr should have such features:
Hard-wearing – Possesses tough, hard material, resistant to fast wear.
High-Tensile Strength – High-tensile strength guarantees tolerance to available intense machining.
Accuracy – Ability to produce required dimensional accuracy. The user should acquire a tolerance balance of not more than 0.01mm.
Lightweight– The ideal SF 5 carbide shouldn’t be heavy but lightweight.
Dimensional Stability – A good SF 5 carbide burr shouldn’t adhere to changing original dimensions when in use.
Versatility – The burr possesses the ability to handle various applications while providing ideal results.
Which Things Influence SF 5 Carbide Burr’s Price?
The main focus of Syndent is on quality and price. We pride in helping existing all clients in saving on costs on high-quality SF 5 carbide burrs we manufacture.
Our company deals with exporting quality SF 5 and other carbide burrs globally
We put affordable logistics channels in place which our customers can utilize to import our products.
SF 5 carbide burrs come in different grades. Lower tungsten grades tend to cost slightly lower than superior grades. This causes variation in prices. Syndent always uses high-grade materials.
The second factor is the shape of the burr or design. Because of different shapes as well as designs, buyers should expect price variations.
The third factor includes an exact delivery place of SF 5 carbide burr. Long-distant deliveries cost higher than short-distant.
In terms of shipment, sea shipping price cost lower compared to air shipping. In general, overseas shipment costs higher because of the duty involved.
Both air and or sea shipment demands payment for import and freight tariffs.
When you make orders direct from Syndent, we give competitive prices for our products.
Why Buy SF 5 Carbide Burr from Syndent?
We produce SF 5 carbide burr from top-notch tungsten carbide and alloy steel. Our SF 5 carbide burr suits various applications in many countries all over the world.
Syndent divides SF carbide into different types based on flutes. The SF 5 carbide burr goes through a quality process and tested.
Find SYNDENT company any time for durable, sharp, effective, and quality SF 5 carbide burrs.